Ford

Home / Ford / Page 6

We Service and Repair all Ford cars

  • 2007 Ford Pickup

    Ford Pickup
    Mileage
    120,546
    Service Date
    7/22/2021
    Services Performed
    • Drain old oil from car. Remove & replace oil filter. Refill oil with motor oil. Check all fluid levels and tire pressures. Preform basic courtesy inspection.
    • POWER STEERING HOSE – Remove & Replace – F150 Return,Each – [Includes: Bleed System.]
     
    ROBERT M. gave our service a 5 star review on 7/22/2021
  • 2008 Ford Explorer

    Ford Explorer
    Mileage
    94,537
    Service Date
    7/7/2021
    Services Performed
    • DS FRONT
     
    BRIAN K. gave our service a 5 star review on 7/8/2021
  • 2008 Ford Focus

    Ford Focus
    Mileage
    169,413
    Service Date
    6/18/2021
    Services Performed
    • VALVE COVER GASKET – Remove & Replace
    • THERMOSTAT &/OR GASKET – Remove & Replace – Assembly (Complete)
    • Drain old coolant from radiator; replace with fresh coolant. Check coolant temp. Pressure test coolant system. Inspect hoses & clamps.
    • FRONT PADS & ROTORS
     
    GLENN W. gave our service a 5 star review on 6/18/2021
  • 2012 Ford Escape

    Ford Escape
    Mileage
    122,152
    Service Date
    6/4/2021
    Services Performed
    • SHOCK &/OR STRUT ASSEMBLY – Remove & Install or Remove & Replace – Both – [DOES NOT include disassemble or alignment.]
     
    CHRIS C. gave our service a 5 star review on 6/4/2021
  • 2005 Ford Focus

    Ford Focus
    Mileage
    119,803
    Service Date
    5/26/2021
    Services Performed
    • P0705 P1702 Findings: found 2 loose ground connections in trunk area. tightened, cleared codes, drove, no codes currently.
    • STABILIZER BAR CONTROL LINK – Remove & Replace – Both Sides
    • AXLE SHAFT ASSEMBLY – Remove & Install or Remove & Replace – Right Side – [NOTE: For Independent Suspension Type Axles, Axle Shaft Assembly consists of Axle Shaft, Boots and Joints.]
     
    TONY S. gave our service a 5 star review on 5/28/2021
  • 2017 Ford Focus

    Ford Focus
    Mileage
    70,709
    Service Date
    5/11/2021
    Services Performed
    • INSTALL CUSTOMER PART VENT SOLENOID
     
    RAONAQ K. gave our service a 5 star review on 5/11/2021
  • 2014 Ford Edge

    Ford Edge
    Mileage
    73,853
    Service Date
    4/26/2021
    Services Performed
    • Drain old oil from car. Remove & replace oil filter. Refill oil with motor oil. Check all fluid levels and tire pressures. Preform basic courtesy inspection.
     
    MARYANNETOM H. gave our service a 5 star review on 4/27/2021
  • 2007 Ford Escape

    Ford Escape
    Mileage
    133,166
    Service Date
    4/23/2021
    Services Performed
    • CALIPER – Remove & Replace – Rear,Both – [Includes: Bleed System and replace Pads (if necessary).]
    • DISC ROTOR – Remove & Replace – Rear,Both
     
    BILL M. gave our service a 5 star review on 4/26/2021
  • 2011 Ford Escape

    Ford Escape
    Mileage
    116,596
    Service Date
    4/20/2021
    Services Performed
    • Castrol EDGE Full Synthetic Oil Change. (5 qts)
    • Scan for codes (INCLUDES 1/2 HOUR MANUAL DIAGNOSTIC TIME)
    • Two or Four Wheel Alignment: Align chassis to manufacturers specifications using factory adjustments.
     
    MICHAEL S. gave our service a 5 star review on 4/21/2021
  • 2008 Ford Econoline

    Ford Econoline
    Mileage
    232,600
    Service Date
    4/9/2021
    Services Performed
    • BALL JOINT – Remove & Replace – E150,E250 One Side,Both,Upper & Lower – [DOES NOT include alignment.]
    • Check brake fluid for moisture and contamination. Inspect all hydraulic line and hoses. Inspect calipers and wheel cylinders. Inspect master cylinder and cap. Flush entire brake system including master cylinder, calipers, wheel cylinders until clean. Recommend every 2 years/25,000 miles.
    • DISC ROTOR – Remove & Replace – E250,E350 Super Duty Rear,Both,Full Floating Axle,Inboard Mounted Rotor,Non Seperable – [Includes: Repack Wheel Bearings (where applicable) and replace Pads (if necessary). DOES NOT include refinishing.]
    • Drain old oil from car. Remove & replace oil filter. Refill oil with motor oil. Check all fluid levels and tire pressures. Preform basic courtesy inspection.
    • Two or Four Wheel Alignment: Align chassis to manufacturers specifications using factory adjustments.
    • WATER PUMP DRIVE BELT – Remove & Replace – Gas – [Includes: Serpentine type Belt(s).]
     
    FRANK M. gave our service a 5 star review on 4/9/2021